Envision

With innovative products and appropriate application technique, it's all possible. If you can envision it, Parex USA can bring it to life.
Get more info.

Products

Product Selector View our new products

All products below are listed alpha-numeric order. These listed products can be narrowed by using the search filters to the right. These filters cover the following areas:

  • Systems & Assemblies: will list only product allowed for the selected type of system or assembly
  • Product Category: Will only list products in the category chosen
  • Division: Will only list products are for use in that CSI division

Step 1: Select First Filter
Select the first filter to search by. If filter meets searching needs no further search action is needed.

 

Step 2: Select Second Filter (Optional)
If listed products need to be refined further, select another filter from the remaining two to further refine results.

 

Step 3: Select Last Filter (Optional)
If listed products need to be refined further, select final remaining filter to further refine results.

Search by:

Start over

121 Cool Base Basecoat & Adhesive

A premium, white basecoat & adhesive for Parex EIFS.  Specially formulated to achieve cooler surfaces temperatures.  Improved finish coverage.  Easier and faster finish application. Applied without the addition of cement.  Mixed on site with water.

121 Dry HI Basecoat & Adhesive

A premium basecoat and adhesive for Parex EIFS.  Fortified with unique raw materials for increased impact and puncture resistance.  Helps achieve higher EIMA/ASTM impact classifications.  Applied without the addition of cement.  Mixed on site with water.  Improved workability. 

Parex USA Thin Veneer Adhesive

Parex USA Thin Veneer Adhesive is a polymer modified Portland cement setting adhesive for installing ceramic tile, stone and thin brick over EIFS, stucco/masonry, or cement board. It is used for  exterior applications. It bonds to most surfaces and is freeze thaw stable.

It is a component of Parex USA Thin Veneer Systems.

AquaSol™ Enhanced Acrylic Finish

NEW PRODUCT - AquaSol™ is an enhanced DPR Acrylic Finish with Hydrophobic and Photocatalytic properties. In addition to the unique features found in Parex's standard acrylic finishes, AquaSol™ also repels water, reflects UV rays, and reduces pollution making it Cleaner, Cooler and Greener.

AquaSol™ is offered in seven textures:

* Swirl Fine * Swirl Coarse
* Multi-texture * Sand Smooth
* Sand Fine * Sand Coarse
* Rio Sand  

VIDEO: View the AquaSol Enhanced Acrylic Finish and Coating Video

AquaSol Enhanced Acrylic Coating

NEW PRODUCT – AquaSol™ Coating is a revolutionary acrylic-based exterior coating with hydrophobic and photocatalytic technology. AquaSol Coating offers excellent water repellent, heat reflective and pollution reducing properties. Cleaner. Cooler. Greener.

VIDEO: View the AquaSol Enhanced Acrylic Finish and Coating Video

Parex USA 360 Fast Window Mesh

A preformed mesh used to reinforce the corners of rough openings. It is ready to use and pre-cut for fast installation It should be used in conjunction with Parex USA Weather Tech WRBs: WeatherSeal Spray & Roll-On, WeatherSeal Trowel-On and WeatherBlock SP1 Spray & Roll-On.

Parex USA 360 Fast Windown Mesh comes in boxes of 40 units.

Parex USA WeatherTech WeatherBlock SP1 Spray & Roll-On

A Class I 100% Acrylic co-polymer fast drying vapor barrier, elastomeric waterproof and air barrier coating which can be either rolled, brushed, or spray applied. Is designed for use as vapor barrier behind exterior claddings. Is extremely flexible: can bridge cracks and accommodate small movements up to 1/32 in. (0.8mm). Bridges 1/8 in. (3mm) gaps at sheathing board joints with Parex USA 396 Sheathing Tape embedded.

Parex USA WeatherTech WeatherFill

Parex USA WeatherFill is a one-component, paintable, and self-leveling moisture curing sealant. It is used in conjunction with Parex USA WRBs to fill penetrations, open joints and seams up to 1/2 inch (13mm). It creates transitions where flexible reinforcement is required to bridge gaps and provide continuous support of fluid-applied flashing water resistive air barriers.

Parex USA WeatherFill is ready to use and cures at room temperature to a tough rubbery solid. It is also breathable and allows damp surfaces to dry. It bonds and cures in wet weather and on damp substrates. It tolerates rain immediately after application.

Parex USA WeatherTech WeatherSeal SB

A single component cement base waterproofing coating for CMU and concrete. It is a multipurpose polymer modified waterproofing product: Air Barrier, Water Resistive Barrier, and Scratch Coat that can be used above grade and below grade for planters or concrete foundations.

Parex USA WeatherSeal SB is can be used to fill joints in CMU and to level rough concrete or CMU walls.

Variance Specialty Finishes

Our latest addition to the Parex USA brand offering.

From Decorative to Abuse Resistant Wall Finishes, Variance offers products with unique textures and colors.

Click on the following link to view the Variance product offering: http://www.variancefinishes.com/