Products

Product Selector View our new products

All products below are listed alpha-numeric order. These listed products can be narrowed by using the search filters to the right. These filters cover the following areas:

  • Systems & Assemblies: will list only product allowed for the selected type of system or assembly
  • Product Category: Will only list products in the category chosen
  • Division: Will only list products are for use in that CSI division

Step 1: Select First Filter
Select the first filter to search by. If filter meets searching needs no further search action is needed.

 

Step 2: Select Second Filter (Optional)
If listed products need to be refined further, select another filter from the remaining two to further refine results.

 

Step 3: Select Last Filter (Optional)
If listed products need to be refined further, select final remaining filter to further refine results.

Search by:

Start over

121 Base Coat & Adhesive

A base Coat for Parex EIFS. Adhesive to laminate EPS to listed substrates. Used in a 50% acrylic paste to 50% cement ratio. Requires the addition of portland cement

121 Dry Base Coat & Adhesive

A base Coat for Parex EIFS. Adhesive to laminate EPS to listed substrates. Applied without the addition of cement. Mixed on site with water. Excellent workability.

121 Optimum Base Coat & Adhesive

A base Coat for Parex EIFS. Adhesive to laminate EPS to listed substrates. Applied without the addition of cement. Mixed on site with water. Best in class workability. Extended pot life.

121 Optimum Wet Base Coat & Adhesive

A premium base coat and adhesive with higher than industry arverage acrylic content. For use in Parex Optimum EIFS. Adhesive to laminate EPS to listed substrates. Used in a 50% acrylic paste to 50% cement ratio. Requires the addition of portland cement

121 XL Base Coat & Adhesive

A Base coat for Parex EIFS. Adhesive to laminate EPS to listed substrate. Applied without the addition of cement. Mixed on site with water

202 Armourwall Stucco Base Sanded

A pre-blended fibered, sanded one coat stucco. Factory-blended mix that requires only the addition of water. Can be installed 3/8-1/2 in. (9.5-12.7mm).

210 Armourwall Stucco Base Concentrate

A fiber reinforced stucco base concentrate. Factory prepared mixture of portland cement, fibers, and proprietary ingredients. Specified sand is added at the job site. Can be installed up to 1/2 in. (12.7mm) in one application.

290 Adacryl Admix & Bonding Agent

A 100% acrylic emulsion additive for portland cement based products. Admixture in portland cement based mixes. High-performance acrylic polymer bonding agent.

302 ABC N1 Base Coat & Adhesive

A base Coat for Parex EIFS. Adhesive to bond EPS to listed substrates. A 100% acrylic polymer base. Ready to use, applied without the addition of cement.

303 Sheathing Adhesive

An adhesive to laminate EPS to listed substrates. A 100% acrylic polymer base. Ready to use, applied without the addition of cement. Exceptional workability.

304 Parflex Base Coat & Adhesive (now known as WeatherDry)

A Waterproofing Base Coat. Acrylic co-polymer base. Requires the addition of portland cement.

310 Primer

A 100% acrylic-based primer. Reduces the chance of efflorescence which may result from the cement content of various bases. Enhances the appearance and uniformity of the finish. Water-vapor permeable. Does not create a vapor retarder. Improves finish coverage.

311 DPR Coating

A 100% acrylic-based coating. DPR (Dirt Pick-up Resistance): The surface of the coating hardens and does not soften again under heat. The non-tacky surface provides high resistance to accumulation of dirt, mold, and pollutants. Excellent hiding power as well as flexibility and drying characteristics. Mixed on site with water. Integrally colored with high quality pigments.

312 Textured Coating

A 100% acrylic-based textured coating. DPR (Dirt Pick-up Resistance): The surface of the coating hardens and does not soften again under heat. The non-tacky surface provides high resistance to accumulation of dirt, mold, and pollutants. Excellent hiding power as well as flexibility and drying characteristics. Mixed on site with water. Integrally colored with high quality pigments.

313 Sanded Primer

A 100% acrylic-based sanded primer. Reduces the chance of efflorescence which may result from the cement content of various bases. Enhances the appearance and uniformity of the finish. Water-vapor permeable. Does not create a vapor retarder  Improves finish coverage

314 Recoat Gel

A 100% acrylic-based nontextured semi-transparent coating. Recoats textured coatings without losing the structure of the finish. DPR (Dirt Pick-up Resistance). The surface of the coating hardens and does not soften again under heat. The non-tacky surface provides high resistance to accumulation of dirt, mold, and pollutants. Integrally colored with high quality pigments.

352 Adhesive

4.5 oz fiberglass mesh. Self-adhesive, facilitates the wrapping of complex contours. Is alkali-resistant. NOTE: Complex architectural details only.

355 Standard Mesh

4.5 oz fiberglass 38 in. (96.5 cm) mesh. Is highly flexible for full walls or details. Is alkali-resistant. Standard reinforcement of Parex USA EIFS walls for impact resistance and details. Required in combination with Parex 358.14 High Impact Mesh or 358.20 Ultra High Impact Mesh. May be used in Parex USA Krak-Shield assemblies.

356 Short Detail Mesh

4.5 oz fiberglass mesh 9.5 in. (24 cm) wide. Is highly flexible for use on details and is alkali-resistant. Ideal for use in backwrapping , corners, reveals and trim.

357 Corner Mesh

7.2 oz fiberglass 19 in. (48.2 cm) mesh. Is a heavy duty factory pre-bent mesh used to fold uniformly around corners. Designed to enhance impact and abuse resistance at corners. Is alkali-resistant.

358.10 Intermediate Impact Mesh

12 oz fiberglass 38 in. (96.5 cm) mesh. Is an intermediate strength mesg used to enhance impact and abuse resistance. Is alkali-resistant. Use with Parex USA EIFS to achieve EIMA’s medium impact strength classification. May be used in Parex USA Krak-Shield assembly.

358.14 High Impact Mesh

15 oz fiberglass 38 in. (96.5 cm) mesh. A high strength mesh used to enhance impact and abuse resistance. Is alkali resistant. Use with Parex USA EIFS to achieve EIMA’s high-impact strength classification.

358.20 Ultra High Impact Mesh

20 oz fiberglass 38 in. (96.5 cm) mesh. Is an ultra high strength mesh used to enhance impact and abuse resistance. IS alkali-resistant. Use with Parex USA EIFS to achieve EIMA’s ultra-high impact strength classification.

358.6 6 oz Mesh

6 oz fiberglass 38 in. (96.5 cm) mesh. For use on full walls. Is alkali Resistant. Standard reinforcement of Parex USA EIFS. Can be used in combination with 358.14 High Impact Mesh or 358.20 Ultra High Impact Mesh.

365 Flashing Membrane

Parex 365 Flashing Membrane is a self-sealing rubberized asphalt membrane that functions as a moisture and air barrier. It is 40 mils (1.0mm) thick and black in color. It can be applied to various substrates such as wood, metal, gypsum sheathing and to house wrap and other weather resistive barriers. The Parex 365 Flashing Membrane is unique: it is faced with a non-woven, integrally bonded fabric that enables adhesion of Parex adhesives. It functions as a seal and flashing at sills of rough openings, deck framing, etc., interfacing with the building substrate and other weather resistive barriers. Available in 3, 6, and 12 inch widths.

369 DrainEdge

Speeds and simplifies application of the WaterMaster systems and assemblies. Eliminates need for pre-wrapping or rasping the back of boards at terminations. Eliminates the need for mineral wool and track at terminations.

396.4 4 in. Sheathing Tape

Description and Use: Non-woven fabric used to tape the joints of the sheathing boards to which a Parex liquid water-resistive barrier is applied.

396.6 6 in. Sheathing Tape

Description and Use: Non-woven fabric used to tape the joints of the sheathing boards to which a Parex liquid water-resistive barrier is applied.

396.9 9 in. Sheathing Tape

Description and Use: Non-woven fabric used to tape the joints of the sheathing boards to which a Parex liquid water-resistive barrier is applied.

415 Elastomeric Coating

A 100% acrylic Elastomeric nontextured coating. Highly flexible: can bridge existing hairline cracks. Integrally colored with high quality pigments.

426 Flexfine - E-lastic Finish

A 100 percent acrylic-based elastomeric textured finish. Made with DPR (Dirt Pick-up Resistance) chemistry. Is highly flexible: can bridge pre-existing or existing hairline cracks. Integrally colored with high quality pigments.

427 Flexsand - E-lastic Finish

A 100 percent acrylic-based elastomeric textured finish. Made with DPR (Dirt Pick-up Resistance) chemistry. Is highly flexible: can bridge pre-existing or existing hairline cracks. Integrally colored with high quality pigments.

428 Flexswirl - E-lastic Finish

A 100 percent acrylic-based elastomeric textured finish. Made with DPR (Dirt Pick-up Resistance) chemistry. Is highly flexible: can bridge pre-existing or existing hairline cracks. Integrally colored with high quality pigments.

429 Flextex - E-lastic Finish

A 100 percent acrylic-based elastomeric textured finish. Made with DPR (Dirt Pick-up Resistance) chemistry. Is highly flexible: can bridge pre-existing or existing hairline cracks. Integrally colored with high quality pigments.

495 KeyGuard (NOW KNOWN AS WeatherSeal Spray & Roll-On)

NOW KNOWN AS WEATHERSEAL SPRAY & ROLL-ON. A 100% acrylic elastomeric waterproof membrane and air barrier which can be either rolled, brushed, or spray applied. Extremely flexible: can bridge cracks and accommodate small movements up to 1/32 in. (.8mm). Designed for use as water-resistive barrier behind Parex EIFS or stucco. Birdges 1/4 in. (6 mm) gaps at sheathing board joints with 396 Sheathing Tape embedded.

530 Swirl Fine - DPR Standard Finish

A 100 percent acrylic-based textured finish. Made with Dirt Pick-Up Resistance (DPR) meaning the surface of the finish hardens and does not soften again under heat. The non-tacky surface provides high resistance to accumulation of dirt, mold, and pollutants .The finish is integrally colored with high quality pigments.

531 Swirl Coarse - DPR Standard Finish

A 100 percent acrylic-based textured finish. Made with Dirt Pick-Up Resistance (DPR) meaning the surface of the finish hardens and does not soften again under heat. The non-tacky surface provides high resistance to accumulation of dirt, mold, and pollutants .The finish is integrally colored with high quality pigments.

532 Multi-Texture - DPR Standard Finish

A 100 percent acrylic-based textured finish. Made with Dirt Pick-Up Resistance (DPR) meaning the surface of the finish hardens and does not soften again under heat. The non-tacky surface provides high resistance to accumulation of dirt, mold, and pollutants .The finish is integrally colored with high quality pigments.

533 Sand Smooth - DPR Standard Finish

A 100 percent acrylic-based textured finish. Made with Dirt Pick-Up Resistance (DPR) meaning the surface of the finish hardens and does not soften again under heat. The non-tacky surface provides high resistance to accumulation of dirt, mold, and pollutants .The finish is integrally colored with high quality pigments.

534 Sand Fine - DPR Standard Finish

A 100 percent acrylic-based textured finish. Made with Dirt Pick-Up Resistance (DPR) meaning the surface of the finish hardens and does not soften again under heat. The non-tacky surface provides high resistance to accumulation of dirt, mold, and pollutants .The finish is integrally colored with high quality pigments.

535 Sand Coarse - DPR Standard Finish

A 100 percent acrylic-based textured finish. Made with Dirt Pick-Up Resistance (DPR) meaning the surface of the finish hardens and does not soften again under heat. The non-tacky surface provides high resistance to accumulation of dirt, mold, and pollutants .The finish is integrally colored with high quality pigments.

580 Swirl Fine - DPR Optimum Acrylic

A 100% acrylic-based textured finish. Integrally colored with high-quality pigments. Exceeds EIMA recommendations and ICC-ES Acceptance Criteria.

583 Sand Smooth - DPR Optimum Finish

A 100% acrylic-based textured finish. Integrally colored with high-quality pigments. Exceeds EIMA recommendations and ICC-ES Acceptance Criteria.

584 Sand Fine - DPR Optimum Finish

A 100% acrylic-based textured finish. Integrally colored with high-quality pigments. Exceeds EIMA recommendations and ICC-ES Acceptance Criteria.

585 Sand Coarse - DPR Optimum Finish

A 100% acrylic-based textured finish. Integrally colored with high-quality pigments. Exceeds EIMA recommendations and ICC-ES Acceptance Criteria.

600 Clear Sealer

A 100% acrylic transparent coating. Contains EPA-registered mildewcide and algicide. .Dirt resistant. The coating hardens and does not soften under solar heating. The nontacky surface provides high resistance to accumulation of dirt and pollutants. Water vapor permeable.

610 Matte Clear Sealer

A 100% acrylic transparent coating. Developed with a special matte agent to reduce sheen. Contains EPA-registered mildewcide and algicide. .Dirt resistant. The coating hardens and does not soften under solar heating. The nontacky surface provides high resistance to accumulation of dirt and pollutants. Water vapor permeable.

630 Cerastone

An attractive multi-color wall finish made of colored aggregates. Made with a clear 100% acrylic vapor-permeable binder. Can be used in interior and exterior application. Ideal for high traffic interior areas. Highly durable, scratch-resistant finish. Can be easily repaired. Requires the use of Parex 610 Matte Clear Sealer.

632 Spraystone

An attractive multi-color wall finish made of colored aggregates. Made with a clear 100% acrylic vapor-permeable binder. Can be used in interior and exterior application. Ideal for high traffic interior areas. Highly durable, scratch-resistant finish. Can be easily repaired. Requires the use of Parex 610 Matte Clear Sealer.

634 Tuffstone Granite

An attractive multi-color wall finish made of colored aggregates. Made with a clear 100% acrylic vapor-permeable binder. Can be used in interior and exterior application. Ideal for high traffic interior areas. Highly durable, scratch-resistant finish. Can be easily repaired.

Accel-Dry

Accel-Dry is an acrylic and elastomeric finish accelerator. Accel-Dry admix is ideal for wet and cold climates as it allows finishes to dry quicker. This is a key feature for jobs that might face inclement weather or need to be completed quickly.

Accel-Pak - Rapid Set Admix

Rapid set admix for any 121 Base Coat & Adhesive to reduce set time for Winter weather or quick EIFS patch & repair work.

Fiber 47 Armourwall Scratch & Brown

A fiber-reinforced factory blended cement scratch and brown coat for use in stucco conforming to ASTM C 926. Factory prepared blend of portland cement, lime, fibers, and proprietary ingredients. Specified sand conforming to ASTM C 897 is added at job site. Can be installed up to 3/8 in. 9.5 mm) thick in one application.

FR-100 Admix

Polymer emulsion admixture for En-Rock portland cement–based products. Enhances curing, adhesion, freeze-thaw resistance, and workability.

Quick Base

A base coat and adhesive for Parex EIFS. Single component 100% acrylic polymer base. Ready to use, applied without the addition of cement. First EIFS base coat & adhesive to be packaged in a box for easier waste management on the jobsite and less impact on landfills.

Select Finishes: Metalic Coating

100% acrylic based metallic coating. Economically replicate the look of metal panels with the ease of a coating application. Includes dirt pickup resistance (DPR) which ensures the coating does not soften under head and resists accumulation of dirt, mold, and pollutants.

Silicone Additive

Provides enhanced UV protection for finishes and coatings to prevent damage from the sun and improves water repellency of any Parex USA or finish.

Stucco Level Coat

Surface leveler for use in Parex Armourwall assemblies. Bonds to stucco brown coat. Can be applied in a thin layer. Applied without the addition of cement. Mixed on site with water only. Excellent workability

The Plus Advantage

Additional dose of biocide protectant formulated at the manufacturing plant.

Type F Stucco Base

Excellent as a base for smooth finishes. No moist curing required. High PSI. High tensile strength. One hour fire-resistance rated assemblies available at 1/2". Under normal conditions, ready to accept finish after 24 hours.

WeatherSeal Spray & Roll-On (formerly 495 KeyGuard)

A 100% acrylic elastomeric waterproof membrane and air barrier which can be either rolled, brushed, or spray applied. Extremely flexible: can bridge cracks and accommodate small movements up to 1/32 in. (.8mm). Designed for use as water-resistive barrier behind Parex EIFS or stucco. Birdges 1/4 in. (6 mm) gaps at sheathing board joints with 396 Sheathing Tape embedded.

WeatherSeal Trowel-On

A 100% acrylic based, trowelable water-resistive barrier membrane. Designed for use as water-resistive barrier behind exterior claddings. Extremely flexible: can bridge existing hairline cracks and accommodate small movements.